Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Avid Elixir Pad Spreader Tool
$4.00
Brake pad spreader tool for Avid Elixir brakes.
Avid X0 Trail Pad Spreader Tool
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
Avid XX / Elixir Brake Lever Pivot Pin Press Tool
$27.00
- For removing/installing lever pivot pins in 2009/2010 XX and Elixir brake levers (2011+ brakes do not require pin tool)
Avid Hydraulic Hose Barb Driver
$34.00
Avid's Hydraulic Hose Barb Driver is quick, precise, and easy to use. It quickly drives threaded and barbed hose barbs into a hydraulic hose and it works on all Avid disc brakes and RockShox hydraulic hoses.
Avid Disc Brake Bleed Kit
$41.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has the tools you need. Keep your Avid Juicy, Code, Guide or Elixir hydraulic discs running strong. Please note, DOT 5.1 brake fluid not included.
Avid Hydraulic Hose Cutter Tool
$51.00
- Hand-held hydraulic hose cutter - Quick, precise cuts - Works with all non-braided hydraulic hoses
Avid Disc Brake Bleed Kit
$53.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong.
Avid CODE Disc Brake Lever Parts 2007-2010
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
Avid Pro Brake Bleed Kit
$88.00
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
Avid Professional Disc Brake Bleed Kit
$88.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has the tools you need. This pro version is designed to stand up to heavy use with high-volume syringes and steel fittings. Keep your Avid Juicy, Code or Elixir hydraulic discs, or SRAM hydraulics running strong. Please note, DOT 5.1 brake fluid not included.
Avid Professional Disc Brake Bleed Kit
$98.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume syringes and steel fittings.
Bahco Hacksaws
$59.94 - $67.90
- Professional Ergo: features an ergonomic design with a high blade tension for straight accurate cuts (accepts 12" blade only). Alternative 55 degree blade mounting for flush cutting. Single touch spring loaded blade release mechanism for blade changes.
CDI Torque Products Preset Torque T-Handles
$30.00
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem, Stem/Steer tube, Frame/Seat post) - 4mm bit is included with magnetic shank to interchange bits as needed - Rounded t-handle grip for added comfort in three different colors for easy identification - Includes certificate of calibration
CDI Torque Products Torqcontrol Torque Tool
$79.99
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem; Stem/Steer tube; Frame/Seat post) - Adjustable from 2nm to 8nm indexing at every 0.1 (Tenth) of a newton meter - 1/4" Hex magnetic bit shank with 6 bits - Positive grip l-Handle design - Includes 4, 5, 6mm, T25 at 1" length and 4mm, T25 at 4" length
CDI Torque Products Torque Wrenches
$174.93 - $190.33
- Easy-to-read precision laser marked scales - Dual scales in English or Newton Meter units - An audible click indicates when the desired torque has been reached - All click torque wrenches are calibrated for use in both directions - Accuracy: +/- 4% cloc
CDI Torque Products Digital Torque Wrench
$413.03
- Digital readout torque wrench that displays real time torque values in any of four units (ft. lbs, in. lbs, Nm, kg.cm.) - Large easy to read digital display - 15 degree flex ratcheting push button socket release head that torques in both clockwise and counter-clockwise directions - Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound - 3 color LED light bar: yellow indicates approaching desired torque setting, green indicates desired torque value is reached, red indicates fastener was overtorqued - Accuracy: +/-2% CW of readings from 20% to 100% of full scale +/- 3% CCW of readings from 20% to 100% of full scale - N.I.S.T. traceable Certificate of Calibration included - Two CR123 Lithium batteries included
Campagnolo Ultra-Torque Hex Tool
$24.99
- Tool for removal and installation of the Ultra-Torque bolt - Fits 10mm Ultra-Torque bolts on all Campagnolo Ultra-Torque cranks
Campagnolo Disk Brake Mineral Oil
$27.00 - $40.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Campagnolo Disc Brake Bleeding Kit
$44.00
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes -Does not include mineral oil - Fits Brand: Campagnolo - Hydraulic Fluid Type: Mineral Oil
Campagnolo Ultra-Torque Bottom Bracket Tool
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications
Cane Creek Double Barrel Adjustment Tool
$12.00
- Collar spanner, Nut wrenches and bottle opener for double barrel rear shocks
Cane Creek DB Bushing Hardware Tool - Assembly
$22.00
Allows safe installation and removal of Cane Creek Double Barrel bushings.
Cannondale SI BB Bearing Removal Tool
$11.00
- Tool required when removing Cannondale System Integrated, BB30, bearings - T-shaped tool for bearing removal
Cannondale Lefty Wheel Truing Dummy Axle
$30.00
- Wheel truing dummy axle and cap for Cannondale lefty forks
Cannondale SI Crank Arm Removal Tool
$60.00
- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle
Crank Brothers Speed Lever
$6.99
Forget the days of wrestling with your tires trying to get that last bit on with a tire lever and usually pinching the tube. Argh! Crank Brothers' Speed Lever installs and removes tires by gently prying them on and off. Hook the lever end under the bead and onto the rim, telescope the tool to the right length and snap the other end onto the axle. Now, just rotate the lever around the wheel to pry the tire on and off. The Speed Lever works with all common tire and wheel combinations.
Crank Brothers Speedier Lever
$7.99 - $192.00
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Crank Brothers M5
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
Crank Brothers m10
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
Crank Brothers m17
$27.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Page 1 of 27 Next page