Parts

3T's Straight Aero Extensions are made of durable, stiff aluminum and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.

For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.

For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.

3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–0 Pro is fabricated in aluminum alloy with a shot-peened, black-anodized finish. - Aluminum shaft with alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black - Weight: 230 grams

3T's Ionic aluminum seatpost is stiff, durable, and features their Driftlock seat clamp assembly for 25mm of setback. This gives you the option of a more rearward position on today’s shorter framesets. The splined aluminum DiffLock coupling is a highly accurate method of setting saddle angle needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle.

Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 Pro has an alloy pillar and comes in two diameters, 27.2mm and 31.6mm, and one length, 350mm.

3T's Stylus is a fresh take on the 2-bolt aluminum seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. The Stylus 25 places the seat clamp assembly with 25mm of setback for a rearward position on the bike.

Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 can handle any type of seatpost rails, from round to all oval shaped carbon rails.

Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. Ionic–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–25 places the seat clamp assembly 25mm behind the seatpost’s centerline. This gives athletes the option of a more rearward position on today’s shorter framesets. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–25 Ltd is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Monocoque high modulus carbon-fiber seatpost - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails

3T's Ergoterra is wide, ergonomic and designed specifically for cyclocross. This carbon bar's flared drops angle outwards by six degrees for comfort and control over rough terrain. A reinforced central section on the top adds stiffness as well as strength for the option of mounting cross top bar brakes. It has a compact drop and reach, perfect for sprints and reaching your brakes at all times. - Viewed from above, the drops angle outwards by 6° - 45cm model is 42cm at the hoods, while the 47cm model is 44cm at the hoods - Compound-curved bends preserve the vertical alignment of brake/shifter levers at their mounting point, so outward flare does not alter shifters’ ergonomics - The 31.8 mm center section is extended and reinforced to mount cyclocross top brake levers - On rough ground that jostles the rider’s handhold, Ergoterra offers more lateral clearance for the forearms, helpful for run-ups

Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.

3T's Integra LTD stem is the perfect solution for any Garmin Edge owner. A Garmin-specific mount is built into this stiff, streamlined stem to keep your cockpit tidy and aero. The Integra's carbon construction keeps it rigid and light for sprints and climbs alike. If you're not riding with your Garmin, or if you don't even own one, the Integra can be fitted with its front end plate for an even more aerodynamic look.

Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.

Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal

- Replacement bar donuts for cobrafist pogies

45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick.

A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.

- Durable cold forged CNC machined freewheel - 3 pawl engagement for stronger hold with engagement every 12 degrees - New removal notch pattern allows for better frame clearance

- Aheadset preload adjusting bolt

Use these to shim All-City's cross levers down from 31.8mm to 26.0mm. - Adapts down to fit 26.0mm road, cross, or drop bars - For use with All-City Cross Levers with 31.8mm bar clamp - Sold as a pair

• Classic track grips • 175mm length