Tubes: All Sizes/Types

Challenge's S.C. Seamless Latex Cross Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 28 to 35mm wide, and has a 47.5mm-long valve with a removable core. - 72 grams

Challenge's S.C. Seamless Latex Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 19 to 28mm wide, and has a 47.5mm-long valve with a removable core. - 60 grams

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental's Light Tubes are made of a lightweight seamless butyl rubber and are individually tested for top quality. These tubes are lighter than standard ones to make your tires feel more supple and accelerate even faster. - 48mm valve length - 125 grams

Continental Light Tubes are made of a lightweight seamless butyl rubber and are individually tested for top quality. These tubes are nearly 30% lighter than standard tubes to make your bicycle easier to ride. - 42mm valve: 70 grams - 60mm valve: 80 grams - 80mm valve: 90 grams

Continental Supersonic Tubes are super light so you enjoy less rotating weight for easier acceleration and climbing. Made of seamless butyl rubber, they are individually tested for top quality. - 50 grams

- Inner Tube - 26" x 1.75/2.125 - Schrader Valve

When you take a traditional sized inner tube and put it in a larger tire, the rubber is forced to stretch beyond what it was originally designed for, making it thinner and more susceptible to punctures, pinches, and flats. Our Tubes are adequately sized to fit anything from 2.10" all the way to 2.40" and beyond. The next area where we thought we could really improve on is the valve. No matter how long you’ve been riding, you will have some point blown a tube at the valve through either installation or damaging it on the sharp valve hole in the rim. We decided to use our own full-length steel valve over the standard rubber valve that most innertubes use today. This steel valve is much stronger and more resilient to damage, and the threaded lockring included allows you to install and inflate the inner tube with way more ease and ensures that the valve is always fully seated and installed correctly. Oh yeah, did we add that we had a lot of fun with the packaging? I’m sure all the guitarists out there will get the name and be stoked to see these stacked up in their local shop.

- 0.9mm wall thickness - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

- The original tube for flat protection - Non-toxic and environmentally safe - Protects against punctures up to 1/8-inch

- The original tube for flat protection - Non-toxic and environmentally safe - Protects against punctures up to 1/8-inch

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 35mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube is for use on rims with an ISO diameter of 451 millimeters.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes fit older Schwinn bicycles with 24-inch wheels. - For use in tires with an ISO diameter of 540mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes fit older Schwinn bicycles with 26 x 1-3/8-inch wheels. - For use on rims with ISO diameter: 597mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 32mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 32mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.